[j-nsp] bgp-l3vpn table is confusing

[Andrew Jimmy]

While executing command below; I'm getting confuse with this prefix
2.2.2.2:3:192.168.6.0/24                    

 

Can someone please explain what the hell is :3: between 2.2.2.2 and
192.168.6.0.

 

andrew at test# run show route receive-protocol bgp 2.2.2.2 

 

inet.0: 2233 destinations, 2233 routes (2233 active, 0 holddown, 0 hidden)

 

inet.3: 1739 destinations, 1739 routes (1739 active, 0 holddown, 0 hidden)

 

__juniper_private1__.inet.0: 5 destinations, 6 routes (5 active, 0 holddown,
0 hidden)

 

__juniper_private2__.inet.0: 1 destinations, 1 routes (0 active, 0 holddown,
1 hidden)

 

QNET.inet.0: 384 destinations, 412 routes (384 active, 0 holddown, 0 hidden)

  Prefix                  Nexthop              MED     Lclpref    AS path

* 10.10.100.56/31         2.2.2.2              100        I

* 192.168.1.0/24          2.2.2.2      505     100        I

* 192.168.2.0/24          2.2.2.2      505     100        I

* 192.168.8.0/24          2.2.2.2      505     100        I

 

mpls.0: 1728 destinations, 1728 routes (1728 active, 0 holddown, 0 hidden)

 

bgp.l3vpn.0: 311 destinations, 317 routes (311 active, 0 holddown, 0 hidden)

  Prefix                  Nexthop              MED     Lclpref    AS path

  2.2.2.2:3:10.10.100.56/31                    

*                         2.2.2.2              100        I

  2.2.2.2:3:192.168.6.0/24                    

*                         2.2.2.2      505     100        I

  2.2.2.2:3:192.168.2.0/24                    

*                         2.2.2.2      505     100        I

  2.2.2.2:3:192.168.8.0/24                    

*                         2.2.2.2      505     100        I