[j-nsp] M10i Junos 8.0

[Drechsel, Thiago (NSN - BR/Curitiba)]

Hi Kevin.

How do access this router?

I once got sluggish CLI because I was accessing the the router from
another Juniper running Junos.
Since the router I was accessing from had rate limit on RE, long outputs
were not possible to display.


Thiago Drechsel

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of ext W. Kevin
Hunt
Sent: Monday, October 13, 2008 4:37 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] M10i Junos 8.0

Is there a default rate limit on packets destined to the RE ?
I've got terribly sluggish CLI on one of my boxes, but nothing jumps out

as the possible cause.
No ddos against the router's interfaces, netflow sampling has been 
turned off, etc...
Load and cpu usage are both very low as checked by snmp and the CLI.

WKH

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp