[j-nsp] M10i Junos 8.0

Truman Boyes truman at suspicious.org
Mon Oct 13 18:30:19 EDT 2008


Are you logging into the RE from the management interface? Any chance  
there is a duplex problem on the switch that it plugs into? I have  
seen really slow speeds on transfers to an RE, only to find the issue  
is related to a switch problem ...

Truman


On 13/10/2008, at 3:36 PM, W. Kevin Hunt wrote:

> Is there a default rate limit on packets destined to the RE ?
> I've got terribly sluggish CLI on one of my boxes, but nothing jumps  
> out as the possible cause.
> No ddos against the router's interfaces, netflow sampling has been  
> turned off, etc...
> Load and cpu usage are both very low as checked by snmp and the CLI.
>
> WKH
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



More information about the juniper-nsp mailing list