[j-nsp] M10i Junos 8.0

[Eric Van Tol]

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of W. Kevin Hunt
> Sent: Monday, October 13, 2008 3:37 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] M10i Junos 8.0
>
> Is there a default rate limit on packets destined to the RE ?
> I've got terribly sluggish CLI on one of my boxes, but nothing jumps out
> as the possible cause.
> No ddos against the router's interfaces, netflow sampling has been
> turned off, etc...
> Load and cpu usage are both very low as checked by snmp and the CLI.
>
> WKH

It's a long shot, but is there a chance that your logs are showing something like the following?

/kernel: chassisd pid 2922 syscall 54 ran for 1251.115 ms

We had this problem in 8.4, I believe.  The symptom was that the CLI was very sluggish every time this entry was logged.

-evt