[j-nsp] M10i Junos 8.0

[Felix Schueren]

Eric Van Tol wrote:
>> -----Original Message-----
>> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
>> bounces at puck.nether.net] On Behalf Of W. Kevin Hunt
>> Sent: Monday, October 13, 2008 3:37 PM
>> To: juniper-nsp at puck.nether.net
>> Subject: [j-nsp] M10i Junos 8.0
>>
>> Is there a default rate limit on packets destined to the RE ?
>> I've got terribly sluggish CLI on one of my boxes, but nothing jumps out
>> as the possible cause.
>> No ddos against the router's interfaces, netflow sampling has been
>> turned off, etc...
>> Load and cpu usage are both very low as checked by snmp and the CLI.
>>
>> WKH
> 
> It's a long shot, but is there a chance that your logs are showing something like the following?
> 
> /kernel: chassisd pid 2922 syscall 54 ran for 1251.115 ms
> 
> We had this problem in 8.4, I believe.  The symptom was that the CLI was very sluggish every time this entry was logged.
> 
we've had trouble with an m10i due to memory problems - the default m10i
came with 256MB RAM, and the box was very sluggish due to swapping,
which also logged entries like "RPD_SCHEDULER_SLIP" etc.

-felix




-- 
Felix Schueren, Head of NOC

Host Europe GmbH - http://www.hosteurope.de
Welserstraße 14 - D-51149 Köln - Germany
Telefon: (0800) 4 67 83 87 - Telefax: (01805) 66 32 33
HRB 28495 Amtsgericht Köln - UST ID DE187370678
Geschäftsführer: Uwe Braun - Patrick Pulvermüller - Stewart Porter