[j-nsp] JUNOSe Upgrade error message
Diogo Montagner
diogo.montagner at gmail.com
Sat Oct 18 14:41:30 EDT 2008
Hi Thiago,
probably you are running out of memory.
Give a look on the SRP Module Memory Requirements section on the 8.2.2
release notes:
http://www.juniper.net/techpubs/software/erx/junose82/sw-rn-erx822/html/sw-rn-erx822-body2.html#964916
Regards,
./diogo -montagner
On Sat, Oct 18, 2008 at 12:18 PM, Drechsel, Thiago (NSN - BR/Curitiba) <
thiago.drechsel at nsn.com> wrote:
> Hi all.
>
> Has anybody seen this message, when uploading JUNOSe?
>
> Loading
> local:/images/srp/srp47d78a49.exe...rsLoadModule(local:/images/srp/srp47
> d78a49.exe): Release is too large for obsoleted CPU to load
>
> This was seen when upgrading a ERX_1410 from 7-2-3 to 8-2-2p0-7.
>
> Thanks for any comment.
>
> Thiago Drechsel
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
More information about the juniper-nsp
mailing list