[j-nsp] JUNOSe Upgrade error message

[Drechsel, Thiago (NSN - BR/Curitiba)]

Hi Guys, thanks for your help.
 
I was informed by JTAC that this is a known issue.
 
This issue matches a Juniper internal KA which basically states that
this SRP in slot 6 (with the problem) will need to be RMA'd so that the
processor can be upgraded.  
 
SRP's not affected will have a serial numbers of xx0219xxxx and later.
 
This is only for SRPs 5G and 10G and the problem shows up from release
8-1-0.
 
Best regards

Thiago Drechsel



  
________________________________

From: ext Diogo Montagner [mailto:diogo.montagner at gmail.com] 
Sent: Saturday, October 18, 2008 3:42 PM
To: Drechsel, Thiago (NSN - BR/Curitiba)
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] JUNOSe Upgrade error message


Hi Thiago,

probably you are running out of memory.

Give a look on the SRP Module Memory Requirements section on the 8.2.2
release notes:
http://www.juniper.net/techpubs/software/erx/junose82/sw-rn-erx822/html/
sw-rn-erx822-body2.html#964916

Regards,
./diogo -montagner



On Sat, Oct 18, 2008 at 12:18 PM, Drechsel, Thiago (NSN - BR/Curitiba)
<thiago.drechsel at nsn.com> wrote:


	Hi all.
	
	Has anybody seen this message, when uploading JUNOSe?
	
	Loading
	
local:/images/srp/srp47d78a49.exe...rsLoadModule(local:/images/srp/srp47
	d78a49.exe):  Release is too large for obsoleted CPU to load
	
	This was seen when upgrading a ERX_1410 from 7-2-3 to 8-2-2p0-7.
	
	Thanks for any comment.
	
	Thiago Drechsel
	
	_______________________________________________
	juniper-nsp mailing list juniper-nsp at puck.nether.net
	https://puck.nether.net/mailman/listinfo/juniper-nsp