[j-nsp] Juniper M7i, Junos9.2 w/ PE-1GE-SX-B , 802.1Q inter vlan routing

[michael.firth at bt.com]

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Samit
> Sent: 21 October 2008 06:32
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Juniper M7i, Junos9.2 w/ PE-1GE-SX-B ,802.1Q 
> inter vlan routing
> 
> Hi,
> 
> I am quite elated that we are now moving into Juniper from Cisco
> (Npe-g1) for our border gateway deployment w/ 2 full bgp feed.
> 
> We are getting couple of used M7i with Junos 9.2 w/ PE-1GE-SX-B next
> week. I have a very simple question....due to lack of junos knowledge,
> The M7i Gig interface will be connected with Catalyst 3400 
> 802.1Q trunk
> port and I need to do a intervlan routing from M7i box . How 
> do I do it,
> any config tips will be appreciated.
> 
Are you aware that the PE-1GE-SX-B PIC is EOL, and has been for a long time?

See Juniper PSN-2004-06-014 for details (if you have access to the Juniper web site:
https://www.juniper.net/alerts/viewalert.jsp?actionBtn=Search&txtAlertNumber=PSN-2004-06-014&viewMode=view

If you don't have access to the Juniper web site, ask who ever you are getting these routers from for a copy of the PSN notice.

My understanding is that its already passed the point where its not guaranteed to be supported in new JunOS releases, though Juniper won't give a categorical statement as to when its likely to actually stop being supported.

Michael