[j-nsp] Juniper M7i, Junos9.2 w/ PE-1GE-SX-B , 802.1Q inter vlan routing

[GIULIANO (UOL)]

Samit,

Try this document:

http://www.juniper.net/techpubs/software/junos/junos92/swconfig-network-interfaces/configuring-ethernet-interfaces.html#id-12156738

http://www.juniper.net/techpubs/software/junos/junos92/swconfig-network-interfaces/configuring-ethernet-physical-interface-properties.html#id-12154979

Att,

Giuliano

> Hi,
> 
> I am quite elated that we are now moving into Juniper from Cisco
> (Npe-g1) for our border gateway deployment w/ 2 full bgp feed.
> 
> We are getting couple of used M7i with Junos 9.2 w/ PE-1GE-SX-B next
> week. I have a very simple question....due to lack of junos knowledge,
> The M7i Gig interface will be connected with Catalyst 3400 802.1Q trunk
> port and I need to do a intervlan routing from M7i box . How do I do it,
> any config tips will be appreciated.
> 
> Regards,
> Samit
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>