[j-nsp] 'phantom' link aggregation interface

[Harry Reynolds]

I believe this is used to  used to rx/tx link control traffic on the ae,
i.e., LACP.

 HTHs


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Marlon Duksa
Sent: Thursday, October 23, 2008 10:10 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] 'phantom' link aggregation interface

Does anyone know what is this ae1.32767 interface. I only configured
ae1.
Where is this additional interface came from?
Thanks,
Marlon

Logical interface ae1.1 (Index 68) (SNMP ifIndex 20211)
    Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.1 0x8100.2 ]
Encapsulation:
ENET2
    Statistics        Packets        pps         Bytes          bps
    Bundle:
        Input :       6332437         99     468523450        59192
        Output:       6332557         98     519059650        65392
    Protocol inet, MTU: 1500
      Addresses, Flags: Is-Preferred Is-Primary
        Destination: 10.0.1/24, Local: 10.0.1.1, Broadcast: 10.0.1.255
    Protocol multiservice, MTU: Unlimited
      Flags: None

  Logical interface ae1.32767 (Index 69) (SNMP ifIndex 20212)
    Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x0000.0 ]  Encapsulation: ENET2
    Statistics        Packets        pps         Bytes          bps
    Bundle:
        Input :             3          0           372          296
        Output:             0          0             0            0
    Protocol multiservice, MTU: Unlimited
      Flags: None
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp