[j-nsp] log

[Jacob Gårder]

Some thing like this might be what you're looking for:

router# set system syslog host x.x.x.x any any


cheers,

-- 
Jacob Gårder


kcc wrote:
> thank you
> 
> in cisco, there is command logging ip <--- x.x.x.x
> 
> when there is any problem in router eg: power issue, the message will be
> sent to the remote syslog server (x.x.x.x)
> 
> how can I set up in juniper as same as this feature?
> 
> Thank you again
> 
> 
> 
> On Sat, Oct 25, 2008 at 5:01 PM, Chris Grundemann <cgrundemann at gmail.com>wrote:
> 
>> It would be helpful if you were more detailed in your request.  What Cisco
>> command are you referring to specifically? -Or- What are you attempting to
>> accomplish (set up logging, view logs, etc)?
>> ~Chris
>>
>>
>>   On Sat, Oct 25, 2008 at 12:01 PM, kcc <peterkcc2001 at gmail.com> wrote:
>>
>>>  Hi
>>>
>>> Can I know what the command in junper same as cisco logging?
>>>
>>> thanks
>>> Peter Kok
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>
>>
>>
>> --
>> Chris Grundemann
>> www.chrisgrundemann.com
>> www.linkedin.com/in/cgrundemann
>>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp