[j-nsp] log

[Brian Spade]

On Sun, Oct 26, 2008 at 10:48 AM, kcc <peterkcc2001 at gmail.com> wrote:

> thank you
>
> in cisco, there is command logging ip <--- x.x.x.x
>
> when there is any problem in router eg: power issue, the message will be
> sent to the remote syslog server (x.x.x.x)
>
> how can I set up in juniper as same as this feature?
>
> Thank you again
>

Take a look at the JunOS system basics configuration guide --

http://www.juniper.net/techpubs/software/junos/junos85/swconfig85-system-basics/id-10864268.html#id-10864268

It shows everything for configuring syslog.

/b