[j-nsp] SSH from cisco router to Juniper Box

[a. rahman isnaini rst / netsoft]

Thanks Rolf & Nic.


a. rahman isnaini r.sutan

Rolf Mendelsohn wrote:
> Hi Rahman,
> 
> Many of the cisco IOS releases do not support ssh version 2, they support only 
> version 1 or 1.5.
> 
> By default i think BSD only allows version 2 and stronger cyphers.
> 
> From my router (running 12.4.18b):
> 
> cr1.lda6.ao>ssh ?
>   -c    Select encryption algorithm
>   -l    Log in using this user name
>   -m    Select HMAC algorithm
>   -o    Specify options
>   -p    Connect to this port
>   -v    Specify SSH Protocol Version
>   WORD  IP address or hostname of a remote system
> 
> Regards,
> Rolf
> 
> On Monday 01 September 2008 04:45:49 a. rahman isnaini rst / netsoft wrote:
>> Hi,
>>
>>
>> I'm trying to do ssh from my cisco router to juniper box.
>> Cisco IP has been permitted, to log in.
>> But not success, the error is :
>>
>> Sep  1 10:22:23  GW-1 sshd[38928]: Did not receive identification string
>> from 192.168.0.99
>> Sep  1 10:22:23  GW-1 inetd[2541]: /usr/sbin/sshd[38928]: exit status
>> 0xff00
>>
>>  From Cisco :
>> gw-99#ssh ?
>>    -c    Select encryption algorithm
>>    -l    Log in using this user name
>>    -o    Specify options
>>    -p    Connect to this port
>>    WORD  IP address or hostname of a remote system
>>
>> Any suggestion ?
>>
>>
>> rgs
>> a. rahman isnaini r.sutan
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> 
>