[j-nsp] Olive question - PIM not working

[Jonathan Looney]

Just a guess: depending on the PIM mode you are using, you may need a tunnel
PIC (or equivalent - AS/MS PIC) in your RP to handle PIM decapsulation. As
the Olive doesn't have a tunnel PIC, that may pose a problem.

-Jon

On Wed, Apr 1, 2009 at 10:14 AM, Thiago Drechsel - Gmail <
thiago.drechsel at gmail.com> wrote:

> Hi list!
>
> I have Olive boxes based on VMWare. I can connect these routers
> together with vlan-id tag since FreeBSD has been patched with
> syscall11.ko. Multicast seems to work, since ospf, rip and ldp have worked
> well between two
> routers.
>
>
> Olive Box (Junos 8.5R1.14)
>
> [Olive1]--em0.1-----------------------------em0.1--[Olive2]
>
>
> Unfortunately, PIM does not seem to work.
>
>
> Again, multicast has already been passed through those interfaces
> because I am running ospf and ldp on both routers and between external
> applications.
>
> Did anyone have the same problem? Any clue??
>
> Thanks in advance!
>
> --
> Thiago Drechsel
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>