[j-nsp] Olive question - PIM not working
sfouant at gmail.com
Wed Apr 1 11:05:28 EDT 2009
On Wed, Apr 1, 2009 at 10:38 AM, Jonathan Looney <jonlooney at gmail.com> wrote:
> Just a guess: depending on the PIM mode you are using, you may need a tunnel
> PIC (or equivalent - AS/MS PIC) in your RP to handle PIM decapsulation. As
> the Olive doesn't have a tunnel PIC, that may pose a problem.
IIRC, you can get around this limitation by setting the router
directly connected to the Multicast source as your RP. This way the
multicast traffic does not need to be encapsulated in PIM Register
Stay the patient course.
Of little worth is your ire.
The network is down.
More information about the juniper-nsp