[j-nsp] Olive question - PIM not working

Tommy Perniciaro TPerniciaro at accuvant.com
Wed Apr 1 11:22:02 EDT 2009


Anyone have an olives running 9.0 or later?

----- Original Message -----
From: juniper-nsp-bounces at puck.nether.net <juniper-nsp-bounces at puck.nether.net>
To: Jonathan Looney <jonlooney at gmail.com>
Cc: Thiago Drechsel - Gmail <thiago.drechsel at gmail.com>; Juniper List <juniper-nsp at puck.nether.net>
Sent: Wed Apr 01 09:05:28 2009
Subject: Re: [j-nsp] Olive question - PIM not working

On Wed, Apr 1, 2009 at 10:38 AM, Jonathan Looney <jonlooney at gmail.com> wrote:
> Just a guess: depending on the PIM mode you are using, you may need a tunnel
> PIC (or equivalent - AS/MS PIC) in your RP to handle PIM decapsulation. As
> the Olive doesn't have a tunnel PIC, that may pose a problem.

IIRC, you can get around this limitation by setting the router
directly connected to the Multicast source as your RP.  This way the
multicast traffic does not need to be encapsulated in PIM Register
messages.

-- 
Stefan Fouant

Stay the patient course.
Of little worth is your ire.
The network is down.
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list