[j-nsp] Olive question - PIM not working

[Jose Madrid]

Do a Google search and you will find much information on it.

On Wed, Apr 1, 2009 at 12:20 PM, ChrisSerafin <chris at chrisserafin.com> wrote:
> Thiago Drechsel - Gmail wrote:
>>
>> Hi Jonathan.
>>
>> That's a good point for the future :-(
>> But the problem is that I can't even establish PIM neighbors, with
>> simple multicast packets.
>> I can se PIM hello messages leaving olive, reaching my physical eth
>> interface, but I can't see PIM hello entering olive.
>>
>> I think Olive OR VMware are unable to handle incoming PIM packets (not
>> multicast packets, since OSPF, LDP are working fine with default
>> configuration)
>>
>> I'll investigate and find the culprit!
>>
>> Ideas are welcome!
>>
>> Best regards.
>>
>> Thiago
>>
>> -----Original Message-----
>> From: Jonathan Looney <jonlooney at gmail.com>
>> To: Thiago Drechsel - Gmail <thiago.drechsel at gmail.com>
>> Cc: Juniper List <juniper-nsp at puck.nether.net>
>> Subject: Re: [j-nsp] Olive question - PIM not working
>> Date: Wed, 1 Apr 2009 10:38:52 -0400
>>
>> Just a guess: depending on the PIM mode you are using, you may need a
>> tunnel PIC (or equivalent - AS/MS PIC) in your RP to handle PIM
>> decapsulation. As the Olive doesn't have a tunnel PIC, that may pose a
>> problem.
>>
>> -Jon
>>
>> On Wed, Apr 1, 2009 at 10:14 AM, Thiago Drechsel - Gmail
>> <thiago.drechsel at gmail.com> wrote:
>>        Hi list!
>>                I have Olive boxes based on VMWare. I can connect these
>> routers
>>        together with vlan-id tag since FreeBSD has been patched with
>>        syscall11.ko. Multicast seems to work, since ospf, rip and ldp
>>        have worked well between two
>>        routers.
>>                        Olive Box (Junos 8.5R1.14)
>>                [Olive1]--em0.1-----------------------------em0.1--[Olive2]
>>                        Unfortunately, PIM does not seem to work.
>>                        Again, multicast has already been passed through
>> those
>>        interfaces
>>        because I am running ospf and ldp on both routers and between
>>        external applications.
>>                Did anyone have the same problem? Any clue??
>>                Thanks in advance!
>>                --
>>        Thiago Drechsel
>>                _______________________________________________
>>        juniper-nsp mailing list juniper-nsp at puck.nether.net
>>        https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>>
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com Version: 8.0.238 / Virus Database:
>> 270.11.35/2034 - Release Date: 04/01/09 06:06:00
>>
>>
>
>
>
>
>
> Where can I find Olive or the VM image of this?
>
> Thanks
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
It has to start somewhere, it has to start sometime.  What better
place than here? What better time than now?