[j-nsp] Olive question - PIM not working

ChrisSerafin chris at chrisserafin.com
Wed Apr 1 12:20:53 EDT 2009


Thiago Drechsel - Gmail wrote:
> Hi Jonathan.
>
> That's a good point for the future :-(
> But the problem is that I can't even establish PIM neighbors, with
> simple multicast packets.
> I can se PIM hello messages leaving olive, reaching my physical eth
> interface, but I can't see PIM hello entering olive.
>
> I think Olive OR VMware are unable to handle incoming PIM packets (not
> multicast packets, since OSPF, LDP are working fine with default
> configuration)
>
> I'll investigate and find the culprit!
>
> Ideas are welcome!
>
> Best regards.
>
> Thiago
>
> -----Original Message-----
> From: Jonathan Looney <jonlooney at gmail.com>
> To: Thiago Drechsel - Gmail <thiago.drechsel at gmail.com>
> Cc: Juniper List <juniper-nsp at puck.nether.net>
> Subject: Re: [j-nsp] Olive question - PIM not working
> Date: Wed, 1 Apr 2009 10:38:52 -0400
>
> Just a guess: depending on the PIM mode you are using, you may need a
> tunnel PIC (or equivalent - AS/MS PIC) in your RP to handle PIM
> decapsulation. As the Olive doesn't have a tunnel PIC, that may pose a
> problem.
>
> -Jon
>
> On Wed, Apr 1, 2009 at 10:14 AM, Thiago Drechsel - Gmail
> <thiago.drechsel at gmail.com> wrote:
>         Hi list!
>         
>         I have Olive boxes based on VMWare. I can connect these routers
>         together with vlan-id tag since FreeBSD has been patched with
>         syscall11.ko. Multicast seems to work, since ospf, rip and ldp
>         have worked well between two
>         routers.
>         
>         
>         Olive Box (Junos 8.5R1.14)
>         
>         [Olive1]--em0.1-----------------------------em0.1--[Olive2]
>         
>         
>         Unfortunately, PIM does not seem to work.
>         
>         
>         Again, multicast has already been passed through those
>         interfaces
>         because I am running ospf and ldp on both routers and between
>         external applications.
>         
>         Did anyone have the same problem? Any clue??
>         
>         Thanks in advance!
>         
>         --
>         Thiago Drechsel
>         
>         _______________________________________________
>         juniper-nsp mailing list juniper-nsp at puck.nether.net
>         https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.0.238 / Virus Database: 270.11.35/2034 - Release Date: 04/01/09 06:06:00
>
>   





Where can I find Olive or the VM image of this?

Thanks


More information about the juniper-nsp mailing list