[j-nsp] display mpls table

[Andrew Jimmy]

When you run the following command, why you can't see the 679 active routes.


 

junos> show route protocol mpls table mpls.0           

 

mpls.0: 679 destinations, 679 routes (679 active, 0 holddown, 0 hidden)

+ = Active Route, - = Last Active, * = Both

 

0                  *[MPLS/0] 4w5d 13:23:40, metric 1

                      Receive

1                  *[MPLS/0] 4w5d 13:23:40, metric 1

                      Receive

2                  *[MPLS/0] 4w5d 13:23:40, metric 1

                      Receive

 

{master}

junos>