[j-nsp] display mpls table

[Stefan Fouant]

On Tue, Apr 28, 2009 at 3:49 PM, Andrew Jimmy <good1 at live.com> wrote:
> When you run the following command, why you can't see the 679 active routes.
>
> junos> show route protocol mpls table mpls.0
>
> mpls.0: 679 destinations, 679 routes (679 active, 0 holddown, 0 hidden)
>
> + = Active Route, - = Last Active, * = Both
>
> 0                  *[MPLS/0] 4w5d 13:23:40, metric 1
>                      Receive
> 1                  *[MPLS/0] 4w5d 13:23:40, metric 1
>                      Receive
> 2                  *[MPLS/0] 4w5d 13:23:40, metric 1
>                      Receive

mpls.0 is the label table.  Try a 'show route table inet.3' to see the routes.

-- 
Stefan Fouant

Stay the patient course.
Of little worth is your ire.
The network is down.