[j-nsp] display mpls table

Andrew Jimmy good1 at live.com
Tue Apr 28 16:10:10 EDT 2009


I know one can displays the route for the LDP FECs, stored in inet.3 using
'show route ldp table inet.3'. What if you want to see the label-switching
state stored in mpls.0

For this you use 'show route table mpls.0'; now I don't know why this
juniper router is not displaying the label-switching state stored in mpls.0
for 679 active labels.



-----Original Message-----
From: Stefan Fouant [mailto:sfouant at gmail.com] 
Sent: Tuesday, April 28, 2009 8:57 PM
To: Andrew Jimmy
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] display mpls table

On Tue, Apr 28, 2009 at 3:49 PM, Andrew Jimmy <good1 at live.com> wrote:
> When you run the following command, why you can't see the 679 active
routes.
>
> junos> show route protocol mpls table mpls.0
>
> mpls.0: 679 destinations, 679 routes (679 active, 0 holddown, 0 hidden)
>
> + = Active Route, - = Last Active, * = Both
>
> 0                  *[MPLS/0] 4w5d 13:23:40, metric 1
>                      Receive
> 1                  *[MPLS/0] 4w5d 13:23:40, metric 1
>                      Receive
> 2                  *[MPLS/0] 4w5d 13:23:40, metric 1
>                      Receive

mpls.0 is the label table.  Try a 'show route table inet.3' to see the
routes.

-- 
Stefan Fouant

Stay the patient course.
Of little worth is your ire.
The network is down.



More information about the juniper-nsp mailing list