[j-nsp] display mpls table

[Nilesh Khambal]

Is this an ingress PE?

Nilesh

Andrew Jimmy wrote:
> I know one can displays the route for the LDP FECs, stored in inet.3 using
> 'show route ldp table inet.3'. What if you want to see the label-switching
> state stored in mpls.0
> 
> For this you use 'show route table mpls.0'; now I don't know why this
> juniper router is not displaying the label-switching state stored in mpls.0
> for 679 active labels.
> 
> 
> 
> -----Original Message-----
> From: Stefan Fouant [mailto:sfouant at gmail.com] 
> Sent: Tuesday, April 28, 2009 8:57 PM
> To: Andrew Jimmy
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] display mpls table
> 
> On Tue, Apr 28, 2009 at 3:49 PM, Andrew Jimmy <good1 at live.com> wrote:
>> When you run the following command, why you can't see the 679 active
> routes.
>> junos> show route protocol mpls table mpls.0
>>
>> mpls.0: 679 destinations, 679 routes (679 active, 0 holddown, 0 hidden)
>>
>> + = Active Route, - = Last Active, * = Both
>>
>> 0                  *[MPLS/0] 4w5d 13:23:40, metric 1
>>                      Receive
>> 1                  *[MPLS/0] 4w5d 13:23:40, metric 1
>>                      Receive
>> 2                  *[MPLS/0] 4w5d 13:23:40, metric 1
>>                      Receive
> 
> mpls.0 is the label table.  Try a 'show route table inet.3' to see the
> routes.
>