[j-nsp] display mpls table

[Stacy W. Smith]

Because they were installed by some protocol other than 'mpls'. Likely  
'ldp' and/or 'rsvp'.

If you want to see all of the active routes in the mpls.0 table  
regardless of the protocol that installed them, then simply execute  
'show route table mpls.0'.

--Stacy

On Apr 28, 2009, at 1:49 PM, Andrew Jimmy wrote:

> When you run the following command, why you can't see the 679 active  
> routes.

>
> junos> show route protocol mpls table mpls.0
>
>
>
> mpls.0: 679 destinations, 679 routes (679 active, 0 holddown, 0  
> hidden)
>
> + = Active Route, - = Last Active, * = Both
>
>
>
> 0                  *[MPLS/0] 4w5d 13:23:40, metric 1
>
>                      Receive
>
> 1                  *[MPLS/0] 4w5d 13:23:40, metric 1
>
>                      Receive
>
> 2                  *[MPLS/0] 4w5d 13:23:40, metric 1
>
>                      Receive
>
>
>
> {master}
>
> junos>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp