[j-nsp] display mpls table

[Harry Reynolds]

Never mind, Stacy has the right answer I beleive:


--- JUNOS 9.1S1.1 built 2009-04-17 17:50:33 UTC
% cli
regress at keller> show route table mpls.0 

mpls.0: 11 destinations, 11 routes (11 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

0                  *[MPLS/0] 02:29:27, metric 1
                      Receive
1                  *[MPLS/0] 02:29:27, metric 1
                      Receive
2                  *[MPLS/0] 02:29:27, metric 1
                      Receive
299776             *[L2CKT/7] 02:28:10
                    > via ge-0/3/2.0, Pop       Offset: 4
299792             *[LDP/9] 02:28:23, metric 1
                    > to 10.210.23.1 via ge-0/0/7.0, Pop      
299792(S=0)        *[LDP/9] 02:28:23, metric 1
                    > to 10.210.23.1 via ge-0/0/7.0, Pop      
299808             *[RSVP/7] 02:27:31, metric 1
                    > to 10.210.23.1 via ge-0/0/7.0, label-switched-path
Bypass->10.210.12.2
299808(S=0)        *[RSVP/7] 02:27:31, metric 1
                    > to 10.210.23.1 via ge-0/0/7.0, label-switched-path
Bypass->10.210.12.2
299824             *[RSVP/7] 02:27:31, metric 1
                    > to 10.210.22.1 via ge-0/0/6.0, label-switched-path
Bypass->10.210.12.1
299824(S=0)        *[RSVP/7] 02:27:31, metric 1
                    > to 10.210.22.1 via ge-0/0/6.0, label-switched-path
Bypass->10.210.12.1
ge-0/3/2.0         *[L2CKT/7] 02:28:10, metric2 1
                    > to 10.210.23.1 via ge-0/0/7.0, Push 299856 Offset:
-4

regress at keller> show route table mpls.0 protocol mpls 

mpls.0: 11 destinations, 11 routes (11 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

0                  *[MPLS/0] 02:29:30, metric 1
                      Receive
1                  *[MPLS/0] 02:29:30, metric 1
                      Receive
2                  *[MPLS/0] 02:29:30, metric 1
                      Receiv

 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Harry Reynolds
Sent: Tuesday, April 28, 2009 1:04 PM
To: Andrew Jimmy; juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] display mpls table

Because those active routes are not in the mpls table. That is a summary
banner for the sum of all routing tables.

Do a show route to see all routes in all tables.  The "missing" active
routes will be found spread over the remaining non-mpls.0 tables.





HTHs

 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Andrew Jimmy
Sent: Tuesday, April 28, 2009 12:49 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] display mpls table

When you run the following command, why you can't see the 679 active
routes.


 

junos> show route protocol mpls table mpls.0           

 

mpls.0: 679 destinations, 679 routes (679 active, 0 holddown, 0 hidden)

+ = Active Route, - = Last Active, * = Both

 

0                  *[MPLS/0] 4w5d 13:23:40, metric 1

                      Receive

1                  *[MPLS/0] 4w5d 13:23:40, metric 1

                      Receive

2                  *[MPLS/0] 4w5d 13:23:40, metric 1

                      Receive

 

{master}

junos>

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp