[j-nsp] display mpls table

[Harry Reynolds]

Because those active routes are not in the mpls table. That is a summary
banner for the sum of all routing tables.

Do a show route to see all routes in all tables.  The "missing" active
routes will be found spread over the remaining non-mpls.0 tables.





HTHs

 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Andrew Jimmy
Sent: Tuesday, April 28, 2009 12:49 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] display mpls table

When you run the following command, why you can't see the 679 active
routes.


 

junos> show route protocol mpls table mpls.0           

 

mpls.0: 679 destinations, 679 routes (679 active, 0 holddown, 0 hidden)

+ = Active Route, - = Last Active, * = Both

 

0                  *[MPLS/0] 4w5d 13:23:40, metric 1

                      Receive

1                  *[MPLS/0] 4w5d 13:23:40, metric 1

                      Receive

2                  *[MPLS/0] 4w5d 13:23:40, metric 1

                      Receive

 

{master}

junos>

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp