[j-nsp] snmp-trap community

[Andrew Jimmy]

Thanks for the reply. So WEBKOM is community the one you send along with
traps to snmp manager for authentication. Correct!

-----Original Message-----
From: Patrik Olsson [mailto:df at webkom.se] 
Sent: Thursday, April 30, 2009 11:45 AM
To: Andrew Jimmy
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] snmp-trap community

The definition of the traps community is the name of the trap-group you
are configuring...

For example, this is my trap group WEBKOM:

trap-group WEBKOM {
    version all;
    categories {
        authentication;
        chassis;
        link;
        remote-operations;
        routing;
        startup;
        rmon-alarm;
        vrrp-events;
        configuration;
        services;
        sonet-alarms;
    }
    targets {
        192.168.142.150;
    }
}

Best
Patrik

Andrew Jimmy wrote:
> You can set the snmp community in JUNOS using.. 'set snmp community public
> authorization read-only'.. But it's for pooling OK
> 
> You know when you configure snmp traps you define a community for trap
> manager..I have configure my trap settings like show be
> 
> low.
> 
> Set trap-group auth-traps targets 5.6.7.8
> 
> Set trap-group auth-traps categories authentication 
> 
>  
> 
> Now where do you define community for trap manager so that you can get
> authenticated when you send traps to trap manager from router.
> 
>  
> 
>  
> 
>  
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp


-- 

//Patrik

Webkom
http://www.webkom.se

+46 (0)709 35 22 99
+46 (0)8 559 26 488