[j-nsp] snmp-trap community

Patrik Olsson df at webkom.se
Thu Apr 30 08:54:58 EDT 2009


Correct!

Patrik


Andrew Jimmy wrote:
> Thanks for the reply. So WEBKOM is community the one you send along with
> traps to snmp manager for authentication. Correct!
> 
> -----Original Message-----
> From: Patrik Olsson [mailto:df at webkom.se] 
> Sent: Thursday, April 30, 2009 11:45 AM
> To: Andrew Jimmy
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] snmp-trap community
> 
> The definition of the traps community is the name of the trap-group you
> are configuring...
> 
> For example, this is my trap group WEBKOM:
> 
> trap-group WEBKOM {
>     version all;
>     categories {
>         authentication;
>         chassis;
>         link;
>         remote-operations;
>         routing;
>         startup;
>         rmon-alarm;
>         vrrp-events;
>         configuration;
>         services;
>         sonet-alarms;
>     }
>     targets {
>         192.168.142.150;
>     }
> }
> 
> Best
> Patrik
> 
> Andrew Jimmy wrote:
>> You can set the snmp community in JUNOS using.. 'set snmp community public
>> authorization read-only'.. But it's for pooling OK
>>
>> You know when you configure snmp traps you define a community for trap
>> manager..I have configure my trap settings like show be
>>
>> low.
>>
>> Set trap-group auth-traps targets 5.6.7.8
>>
>> Set trap-group auth-traps categories authentication 
>>
>>  
>>
>> Now where do you define community for trap manager so that you can get
>> authenticated when you send traps to trap manager from router.
>>
>>  
>>
>>  
>>
>>  
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> 


-- 

//Patrik

Webkom
http://www.webkom.se

+46 (0)709 35 22 99
+46 (0)8 559 26 488




More information about the juniper-nsp mailing list