[j-nsp] License configuration for M-series

[Muhammad Atif Jauahar]

Hi

Recently I have installed Multi Service PIC on M-series Router (M40e). I
also got license for MLPPP with MS PIC.

Show chassis hardware (Output)

FPC 4            REV 04   710-011725   KG2692            M40e EP-FPC Type 1
  CPU            REV 03   710-004602   KE2918            FPC CPU
  PIC 0          REV 18   750-007631   WS7611            10x CHE1 IQ
  *PIC 2          REV 13   750-014884   XG1964            MultiServices 100*

==========================================================
show interface terse (Output)

gr-4/2/0                up    up
ip-4/2/0                up    up
mt-4/2/0                up    up
pd-4/2/0                up    up
pe-4/2/0                up    up
sp-4/2/0                up    up
sp-4/2/0.16383          up    up   inet     10.0.0.1            -->
10.0.0.82
vt-4/2/0                up    up


I m not getting MLPPP interface by above command. Do I need to configure
license for MLPPP, if yes then tell me how?

I try to find material on internet, didn't found any related material.
Kindly guide me regarding this.


Regards,
Atif.