[j-nsp] License configuration for M-series

[masood at nexlinx.net.pk]

If you want to use MLPPP,CRTP etc MS PIC should be running the Layer 2
link service package.

To determine which package a MS PIC supports, issue the show chassis pic
fpc-slot slot-number pic-slot slot-number command. The Package field
displays the value Layer-2 or Layer-3.

To enable a service package, include the service-package statement at the
[edit chassis fpc slot-number pic pic-number adaptive-services] hierarchy
level, and specify layer-2 or layer-3

Note: You enable service packages per PIC, not per port. For example, if
you configure the Layer 2 service package, the entire PIC uses the
configured package.

Regards,
Masood


> Hi
>
> Recently I have installed Multi Service PIC on M-series Router (M40e). I
> also got license for MLPPP with MS PIC.
>
> Show chassis hardware (Output)
>
> FPC 4            REV 04   710-011725   KG2692            M40e EP-FPC Type
> 1
>   CPU            REV 03   710-004602   KE2918            FPC CPU
>   PIC 0          REV 18   750-007631   WS7611            10x CHE1 IQ
>   *PIC 2          REV 13   750-014884   XG1964            MultiServices
> 100*
>
> ==========================================================
> show interface terse (Output)
>
> gr-4/2/0                up    up
> ip-4/2/0                up    up
> mt-4/2/0                up    up
> pd-4/2/0                up    up
> pe-4/2/0                up    up
> sp-4/2/0                up    up
> sp-4/2/0.16383          up    up   inet     10.0.0.1            -->
> 10.0.0.82
> vt-4/2/0                up    up
>
>
> I m not getting MLPPP interface by above command. Do I need to configure
> license for MLPPP, if yes then tell me how?
>
> I try to find material on internet, didn't found any related material.
> Kindly guide me regarding this.
>
>
> Regards,
> Atif.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>