[j-nsp] lsp required for vpls?
Dinesh
dineshbs123 at gmail.com
Thu Aug 6 13:01:24 EDT 2009
Simon,
I am not a Junos expert, but in general since you enabled link ldp between
the PE routers and also a targteted ldp between PE's , you should be
okay. did on quiet get what you meant by "without MPLS-LSP" ??? because
you already have mpls lsp by enabling link ldp.
regards
dinesh
On Thu, Aug 6, 2009 at 9:35 AM, Simon Chen <simonchennj at gmail.com> wrote:
> Hi all,
>
> I read in the VPN configuration guide that LSPs between PEs are
> required for VPLS. However, I am able to establish a VPLS setup using
> LDP signalling, but without MPLS-LSP between PEs.
>
> Does anyone know why? My guess is that LSP is only required if you're
> going for the BGP signalling, but not required if you're doing LDP.
> Can anyone clarify this?
>
> Thanks.
> -Simon
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
More information about the juniper-nsp
mailing list