[j-nsp] monitor interface rate

[Bit Gossip]

cacti (http://cacti.net/) does it out-of-the box...


On Thu, 2009-08-13 at 09:06 -0400, harbor235 wrote:
> To all,
> 
> I would like to monitor a juniper router interface via snmp, simple enough.
> However, I do not want bps, I want to monitor the interface as a percentage
> of it's total capacity. In the end I want to be notified if my interface
> exceeds 70%
> of capacity so I can initiate capacity management planning.
> 
> I know I can on an interface by interface basis figure out 70% and program
> that into
> each interface collection, however, that does not scale. Is there anyone out
> there
> that knows of a MIB obect that does this?
> 
> thanx,
> 
> Mike
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp