[j-nsp] monitor interface rate

[Alex]

Apart from using Cacti/HPOV capabilities to calculate % usage, etc you could 
do this by writing an event-script that takes interface stats, does some 
trivial math and populates Utility MIB (jnxUtil).
Rgds
Alex

----- Original Message ----- 
From: "harbor235" <harbor235 at gmail.com>
To: <juniper-nsp at puck.nether.net>
Sent: Thursday, August 13, 2009 2:06 PM
Subject: [j-nsp] monitor interface rate


> To all,
>
> I would like to monitor a juniper router interface via snmp, simple 
> enough.
> However, I do not want bps, I want to monitor the interface as a 
> percentage
> of it's total capacity. In the end I want to be notified if my interface
> exceeds 70%
> of capacity so I can initiate capacity management planning.
>
> I know I can on an interface by interface basis figure out 70% and program
> that into
> each interface collection, however, that does not scale. Is there anyone 
> out
> there
> that knows of a MIB obect that does this?
>
> thanx,
>
> Mike
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>