[j-nsp] Ethernet CCCC Outer Vlan removal

[Nalkhande Tarique Abbas]

Pls have a look here,

http://www.juniper.net/techpubs/software/junos/junos90/swconfig-network-
interfaces/stacking-and-rewriting-gigabit-ethernet-iq-vlan-tags.html#id-
12141009


Hope it helps!


 
Thanks & Regards,
Tarique A. Nalkhande

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Simon Allard
Sent: Friday, August 28, 2009 5:59 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Ethernet CCCC Outer Vlan removal

I have an incoming Ethernet CCCC which is double 802.1q tagged. Ie outer
vlan 2000 inter vlan 1000.

Is there anyway I can remove the outervlan 2000 before placing it into a
Ethernet-cccc? I have a MX960 with a 40-port Gigabit Ethernet R EQ card
installed in it.

I have been reading this page on pop,push etc, but it seems to only have
a place in incoming untagged frames.
http://www.juniper.net/techpubs/en_US/junos9.5/information-products/topi
c-collections/config-guide-network-interfaces/interfaces-rewriting-vlan-
tag-untagged-frames.html

Anyone got an idea how I can achieve this?

Cheers.

Simon Allard

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp