[j-nsp] Juniper Netscreen and Riverbed Steelhead Autodiscovery

[ChrisSerafin]

I know we have a client with 50+ SSG5's and 140's and we did not have to 
do anything special regarding the Steelheads on the Juniper side.



Anh Khoa Le Viet wrote:
> Hi Experts,
>
> Is anybody here experience with Netscreen and Riverbed? Could you please
> have a look with this issue and give your advise?
>  We are deploying some Riverbed SteelHead all over the regions and will use
> the Auto-discovery feature of SteelHead (based on TCP Options 76 and 78).
> I'm wondering whether our Firewalls which are Netscreen can allow the TCP
> packets (here is the SYN packets) that can come through and do not strip out
> the TCP options in the SYN packet (like Cisco ASA and PIX does)? Are there
> any documents that mentions about this? Does Netscreen do the same as Cisco
> ASA or leave the TCP Options as it is?
>
> Thank you very much for your help.
>
> Best Regards,
> Khoa
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.409 / Virus Database: 270.13.72/2337 - Release Date: 08/31/09 05:50:00
>
>