[j-nsp] Juniper 10GE XFP

[Jay Hanke]

Can you share the vendors that didn't work in the MX/T series? I haven't run into a problem with MRV and Cisco(Finistar) optics in the MX.

The EX is a different animal, I think there is only support for DOM on the XFP ports unlike the MX where it is supported on all the SFP and XFP ports. Also, I think DOM support is recent (10.0?) on the EX.

Thanks,

Jay

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Martin Levin
Sent: Monday, December 14, 2009 6:13 AM
To: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Juniper 10GE XFP

Oh, haven't seen that on our MX. Let's hope that is just
incompatibilities, because that I have seen with different vendors. On
some vendors DOM works and on others it doesn't (or gives strange
values)... 
 
---
Martin Levin
IT-strategy & planning
Mölndals stad


>>> 


Från:"Johannes Resch" <jr at xor.at>
Till:<juniper-nsp at puck.nether.net>
Datum:2009-12-14 13:05
Ärende:Re: [j-nsp] Juniper 10GE XFP
On Mon, December 14, 2009 11:20, Martin Levin wrote:
> Ah, unfortunately that's no longer exactly true.
>
> Juniper doesn't vendor lock, all vendors work (sort of, I had
trouble
> with certain XFPs in EX4200 so buyer beware!) but certain functions
> might not. As of now the only thing they have locked out if the
XFP/SFP
> are not Juniper are DOM/DDM. Other functions might follow, who
knows.
> This only applies to EX, in other Juniper products all things should
> work.

FWIW, I've seen this behavior (no DOM support for non-JNPR optics) also
on
MX and T series.

cheers,
-jr
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp