[j-nsp] show route advertising-protocol on IPv6 peers

[Daniel Verlouw]

Hi all,

has anyone ever seen the behaviour below? I've been going back and forth
with JTAC for months now without any result (which seems to be the norm
nowadays...). We just upgraded a few M-series boxes from 9.3 to 9.5R3
and the issue still persists. It seems the issue was introduced in one
of the earlier 9.x releases.

daniel at XXXXX> show route advertising-protocol bgp <ipv6 neighbor>
error: timeout communicating with routing daemon

Dec 16 16:20:23.671 2009  XXXXX mgd[73749]: %INTERACT-6-UI_CMDLINE_READ_LINE: User 'daniel', command 'show route advertising-protocol bgp <ipv6 neighbor> '
Dec 16 16:21:23.659 2009  XXXXX mgd[73749]: %DAEMON-5-UI_READ_TIMEOUT: Timeout on read of peer 'routing'

It's most obvious with IPv6 neighbors receiving a full feed (+/- 2400
prefixes) from us, whereas the same command with an IPv4 neighbor
receiving a full feed (>300k prefixes) is almost instantaneous.

Cheers,
   Daniel.