[j-nsp] Policed discards

[Nilesh Khambal]

Please disable cdp and keepalives on Cisco port connected to this M7i. 
Also, disable spanning tree on this port by configuring it as an access 
port.

Thanks,
Nilesh.

Samit wrote:
> Hi, I just installed my first juniper M7i in the production couple of
> hour back and after resolving few routing issue so far it is running
> smoothly. I noticed that my PE-1GE-SX-B interface is showing only
> "Policed discards", the counter which increases by 1 in every 1-2 secs
> but the inbuilt GE is showing no errors. As I am not running any
> qos/policing in the interface I was wondering what does it means..and
> how to fix this error?  the router's both interface is connected with a
> Cisco 3400ME in different Vlan.
> 
> interfaces {
>     ge-0/0/0 {
>         description " Cisco3400-ME Gi0/1 Vlan2";
>         unit 0 {
>             family inet {
>                 address 192.168.0.1/28;
>             }
>         }
>     }
> 
>                                                           Delay: 1/0/1
> Interface: ge-0/0/0, Enabled, Link is Up
> Encapsulation: Ethernet, Speed: 1000mbps
> Traffic statistics:                                           Current delta
>   Input bytes:                3589144576 (34951312 bps)          [26149611]
>   Output bytes:               4117970233 (36219936 bps)          [27659648]
>   Input packets:                12654493 (15073 pps)                [90668]
>   Output packets:               13058310 (15834 pps)                [94510]
> Error statistics:
>   Input errors:                        0                                [0]
>   Input drops:                         0                                [0]
>   Input framing errors:                0                                [0]
>   Policed discards:                  558                                [4]
>   L3 incompletes:                      0                                [0]
>   L2 channel errors:                   0                                [0]
>   L2 mismatch timeouts:                0                                [0]
>   Carrier transitions:                 0  Output errors:                [0]
> 
> 
> 
> Regards,
> Samit
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>