[j-nsp] L2VPN Across MX480

[David Ball]

  Using 'encapsulation ethernet-ccc' on your MX ints for transparency ?

David B


2009/2/11 Joseph Soricelli <joe at proteus.net>:
> All-
>
> Got a simple L2VPN setup with some 7609 as CE and MX480 (9.2R3) as PE (no P
> boxes).
>
> 7609----MX480-1----MX480-2----7609
>  CE           PE                 PE               CE
>
>
> L2VPN comes up with no issues. In troubleshooting some intermittent ping and
> L3 issues from the 7609 side I notice that the switches do not see each
> other via CDP, nor to they seem to be seeing each other via STP.
>
> It hasn't been THAT long since I was doing one of these last but I'll be
> darned if I can recall this specific tidbit. So, am I crazy, or should those
> packets be passed through the L2VPN just fine?
>
> As a side note, I think the problem might actually be on the 7609 side since
> I see output packet stats on the PE but no inbound packet stats on the CE.
> But, I gotta make sure my STP/CDP assumption is correct before I start
> throwing stones! ;-)
>
> Thanks,
> Joe
>
> Joseph Soricelli
> JNCIE #14/ CCIE #4803
> 703-980-3999
> joe at proteus.net
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>