[j-nsp] EX4200 1000baseT SFP unsupported in 9.4

[Ariff Premji]

Try using the latest 9.4 release.  A revision was made to address  
unknown SFPs the same way as it was back in 9.1.  It may or may not  
work for you but its worth a try.

-Ariff

On Feb 14, 2009, at 4:26 PM, Jeff S Wheeler wrote:

> On Sat, 2009-02-14 at 23:54 +0000, Leigh Porter wrote:
>> Rather than ask if there is a supported SFP for this release/ 
>> hardware,
> I'd
>> like to know why SFPs that worked fine suddenly break with a point
> software
>> upgrade!
>>
>> Any response from Juniper?
> Upon reading Ruslan's post regarding a similar 9.2 -> 9.3 problem, I
> remembered that I had problems with several generic SFPs on 9.2, yet
> they work fine in my other equipment.  This is very distressing, and  
> is
> now at #1 on my EX4200 bitch list. :-/
>
> It isn't unfair for Juniper to say, "buy Juniper branded SFPs so we  
> can
> ensure they will work correctly," when something strange happens  
> once in
> a while.  However, that doesn't seem to be the case here.
>
> -- 
> Jeff S Wheeler <jsw at inconcepts.biz> +1-212-981-0607
> Sr Network Operator  /  Innovative Network Concepts
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp