[j-nsp] Cant load share in Agregated sonet

[Nilesh Khambal]

Is it the traffic coming in from "pacnet" vrf that you are trying to 
load balance when going over as1 towards MPLS cloud? If so, I think you 
should configure "family inet" hashing as well on the PE.

Thanks,
Nilesh





As ad Arafat wrote:
> Hi Nilesh,
> 
> I attached  "show route a.b.c.d extensive" and "show route
> forwarding-table destination a.b.c.d extensive"
> i use hash like this.
> 
> hash-key {
>     family mpls {
>         label-1;
>         payload {
>             ip;
>         }
>     }
> }
> 
> On Wed, Feb 18, 2009 at 12:03 PM, Nilesh Khambal <nkhambal at juniper.net> wrote:
>> Can you please send the output of below 2 commands for the destination that
>> you want to load balance?
>>
>> "show route a.b.c.d extensive"
>> "show route forwarding-table destination a.b.c.d extensive"
>>
>> What kind of hashing have you configured under "edit forwarding-options"?
>>
>>
>> Thanks,
>> Nilesh.
>>
>> As ad Arafat wrote:
>>> Hi list,
>>>
>>> I got m7i and m10i linked aggregated sonet interface with 2 sonet
>>> interface inside it.
>>> I already add load-balancing per-packet policy and forwarding-option
>>> cinfiguration
>>> But one of sonet interface seem underutilized.
>>>
>>> Any workaround for this issue?
>>>
>>> Best Regads
>>>
>>> Asad
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp