[j-nsp] Cant load share in Agregated sonet
As ad Arafat
asad.arafat at gmail.com
Wed Feb 18 00:49:11 EST 2009
Nilesh,
I already add "family inet" as hash-key on both PE, but it still cant
achieve load sharing in as1
Best Regards
As'ad
On Wed, Feb 18, 2009 at 12:26 PM, Nilesh Khambal <nkhambal at juniper.net> wrote:
> Is it the traffic coming in from "pacnet" vrf that you are trying to load
> balance when going over as1 towards MPLS cloud? If so, I think you should
> configure "family inet" hashing as well on the PE.
>
> Thanks,
> Nilesh
>
>
>
>
>
> As ad Arafat wrote:
>>
>> Hi Nilesh,
>>
>> I attached "show route a.b.c.d extensive" and "show route
>> forwarding-table destination a.b.c.d extensive"
>> i use hash like this.
>>
>> hash-key {
>> family mpls {
>> label-1;
>> payload {
>> ip;
>> }
>> }
>> }
>>
>> On Wed, Feb 18, 2009 at 12:03 PM, Nilesh Khambal <nkhambal at juniper.net>
>> wrote:
>>>
>>> Can you please send the output of below 2 commands for the destination
>>> that
>>> you want to load balance?
>>>
>>> "show route a.b.c.d extensive"
>>> "show route forwarding-table destination a.b.c.d extensive"
>>>
>>> What kind of hashing have you configured under "edit forwarding-options"?
>>>
>>>
>>> Thanks,
>>> Nilesh.
>>>
>>> As ad Arafat wrote:
>>>>
>>>> Hi list,
>>>>
>>>> I got m7i and m10i linked aggregated sonet interface with 2 sonet
>>>> interface inside it.
>>>> I already add load-balancing per-packet policy and forwarding-option
>>>> cinfiguration
>>>> But one of sonet interface seem underutilized.
>>>>
>>>> Any workaround for this issue?
>>>>
>>>> Best Regads
>>>>
>>>> Asad
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
More information about the juniper-nsp
mailing list