[j-nsp] Build a GRE tunnel on VRRP routers

[Derick Winkworth]

VRRP was designed really for having two routers on a LAN and providing
"default gateway" redundancy for hosts on the LAN.

You should not mix your GRE tunnels with VRRP.  Just build two tunnels
and use a routing protocol over them for redundancy.

Fatiha HOUACINE wrote:
> Hi,
>
> I would  like to configure a GRE tunnel between  two couples of VRRP
> redundant routers ,
>
> The problem is that, I can't Use the Virtual IP  to build on the tunnel.
>
> How can I build my GRE in this case, to detect faillure and  interact with
> the  VRRP mecanism.
>
>  O      ______________________    O
>  VRRP   ________*GRE*__________    VRRP
>  O                                                  O
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.0.237 / Virus Database: 270.11.2/1965 - Release Date: 02/21/09 15:36:00
>
>