[j-nsp] multiple loopback addresses

[Marlon Duksa]

Fair enough. Thanks.Marlon

On Wed, Feb 25, 2009 at 2:07 PM, Leslie <leslie at craigslist.org> wrote:

> You can put multiple addresses on the same unit - like having multiple ip
> addresses on unit 0, but not make multiple units with ip addresses, at least
> afaik
>
> Leslie
>
> Marlon Duksa wrote:
>
>> Does anyone know if Juniper support multiple loopback interfaces for the
>> same family.For example lo0 unit 0 family inet
>>                         unit 1 family inet
>>                             :
>>
>> For base routing instance or VRFs. I need to have multiple loopbacks in a
>> single instance (base or VRF).
>>
>> I tried and it seems that Juniper can't support this. But I'm still in
>> disbelief....
>> This is for MX or M series.
>> Thanks,
>> Marlon
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>