[j-nsp] multiple loopback addresses

[Leslie]

You can put multiple addresses on the same unit - like having multiple 
ip addresses on unit 0, but not make multiple units with ip addresses, 
at least afaik

Leslie

Marlon Duksa wrote:
> Does anyone know if Juniper support multiple loopback interfaces for the
> same family.For example lo0 unit 0 family inet
>                          unit 1 family inet
>                              :
> 
> For base routing instance or VRFs. I need to have multiple loopbacks in a
> single instance (base or VRF).
> 
> I tried and it seems that Juniper can't support this. But I'm still in
> disbelief....
> This is for MX or M series.
> Thanks,
> Marlon
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp