[j-nsp] multiple loopback addresses

[Harry Reynolds]

Hmm. Possible. I thought whatever was the primary address would be used
for n unnumbered interfaces such that things were still deterministic. I
can see where an additional address that results in a change of system
primary address would be disruptive. ;)

Regards


http://www.juniper.net/techpubs/software/junos/junos91/swconfig-network-
interfaces/configuring-a-preferred-source-address-for-unnumbered-etherne
tinterfaces.html#configuring-preferred-source-address-for-unnumbered-eth
ernet-interfaces



 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Chris Adams
Sent: Wednesday, February 25, 2009 2:24 PM
To: Juniper-Nsp
Subject: Re: [j-nsp] multiple loopback addresses

Once upon a time, Harry Reynolds <harry at juniper.net> said:
> Assign multiple IPs to the same lo0 unit

IIRC, if you do this, you'll have trouble with PPP and unnumbered
interfaces.
--
Chris Adams <cmadams at hiwaay.net>
Systems and Network Administrator - HiWAAY Internet Services I don't
speak for anybody but myself - that's enough trouble.
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp