[j-nsp] l3vpn for IPv6 Unicast - Issue

Mark Tinka mtinka at globaltransit.net
Mon Jan 5 04:06:18 EST 2009

On Monday 05 January 2009 03:57:16 am Kevin Oberman wrote:

> Unless your iBGP mesh is very small, it's far easier to
> run a single mesh. We have always exchanged our IPv6
> routes over an IPv4 iBGP mesh just to make things more
> manageable. When we see really complete IPv6 support in
> JunOS, we will move both v4 and v6 announcements to run
> over a single IPv6 mesh, but I suspect that will not be
> something for us to worry about for at least a couple
> more years and probably until after I retire.

We maintain a dual-stack implementation across the board. We 
decided to deploy v6 natively from day one.



-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 835 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20090105/50a84e26/attachment.bin>

More information about the juniper-nsp mailing list