[j-nsp] ex4200 static arp

[boikov at spnet.net]

Hi,

the interface of ex4200 switch is connected to other switch and the  
port is in ethernet-switching mode. I found how to setup static arp  
entry in the vlan but I get error when commiting, something like  
"multicast mac xx:xx:xx... is not allowed"


Quoting Frances Albemuth <frances.cincinattus at gmail.com>:

>  Try `set interfaces <interface> family inet address <router_address>
> arp <nokia_ip_address> mac <nokia_mac_address>`.
>
>  -FC
>
> On Sat, Jan 17, 2009 at 10:33 AM, Yordan Boikov <boikov at spnet.net> wrote:
>> Hi,
>>
>> I have a juniper ex4200 and I want to connect it to nokia checkpoint which
>> use a multicast arp. the problem is that ex4200 don't see the mac address of
>> nokia. How can i set static entry in arp table? is there are some other
>> solution?
>>
>> 10x in advneced
>>
>>
>>
>> --
>> Yordan Boikov
>> :wq
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>