[j-nsp] DHCP static bindings on J2320

[masood at nexlinx.net.pk]

the services router supports dhcp client requests received on fast
ethernet interfaces only. dhcp is not supported on interfaces that are
part of a virtual private network (vpn).

by the way there is already a thread on this topic... the following url
will take u to the page..

http://www.gossamer-threads.com/lists/nsp/juniper/14116

Regards,
Masood


> Hello,
>
> I'm using J2320 (JunOS 9.5R1.8) as a router in office network with ~10
> VLANs.
> DHCP works good on it but there is confusing issue with DHCP static
> bindings.
> I've configured binding:
>
> minotaur at cr1-kur.ki> show configuration system services dhcp
> static-binding 00:40:01:27:e2:87
> fixed-address {
>     10.3.1.143;
> }
> router {
>     10.3.1.129;
> }
>
> But when device reboots it still receives IP address from dynamic pool:
>
> minotaur at cr1-kur.ki> show system services dhcp binding detail | match
> 00:40:01:27:e2:87
> 10.3.1.143       00:40:01:27:e2:87  static   never
> active
> 10.3.1.184       00:40:01:27:e2:87  dynamic  2009-08-15 11:11:18 EEST
> active
>
> Well, I tried to clear dynamic lease, then rebooted device again, but
> without
> any effect: device still receives IP address from dynamic pool in spite of
> fact
> that static binding is configured.
>
> Any help is kindly appreciated! Thanks.
>
> --
> MINO-RIPE
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>