[j-nsp] Source address for FTP?

[david.roy at orange-ftgroup.com]

Use the command "set system default-address-selection". And outgoing FTP session will use your primary lo0.0 address

Regards,
David

-----Message d'origine-----
De : juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] De la part de Tomasz Szewczyk
Envoyé : mercredi 22 juillet 2009 16:19
À : Juniper Puck
Objet : [j-nsp] Source address for FTP?

Hi all,

Is there any option in JunOS which allows to set source address (lo0.0) for outgoing (initiated by router) FTP connections?

Thanks

Tomek

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

*********************************
This message and any attachments (the "message") are confidential and intended solely for the addressees. 
Any unauthorised use or dissemination is prohibited.
Messages are susceptible to alteration. 
France Telecom Group shall not be liable for the message if altered, changed or falsified.
If you are not the intended addressee of this message, please cancel it immediately and inform the sender.
********************************