[j-nsp] Source address for FTP?

[Tomasz Szewczyk]

Hi,

Thanks for this info - that is what I need :-)

Tomek

david.roy at orange-ftgroup.com pisze:
> Use the command "set system default-address-selection". And outgoing FTP session will use your primary lo0.0 address
>
> Regards,
> David
>
> -----Message d'origine-----
> De : juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] De la part de Tomasz Szewczyk
> Envoyé : mercredi 22 juillet 2009 16:19
> À : Juniper Puck
> Objet : [j-nsp] Source address for FTP?
>
> Hi all,
>
> Is there any option in JunOS which allows to set source address (lo0.0) for outgoing (initiated by router) FTP connections?
>
> Thanks
>
> Tomek
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> *********************************
> This message and any attachments (the "message") are confidential and intended solely for the addressees. 
> Any unauthorised use or dissemination is prohibited.
> Messages are susceptible to alteration. 
> France Telecom Group shall not be liable for the message if altered, changed or falsified.
> If you are not the intended addressee of this message, please cancel it immediately and inform the sender.
> ********************************
>
>